Enduro Elite SM1050-2

This motor pays for itself with the energy it saves! The super quiet Enduro™ Elite SM1050-2 Servo Motor pays for itself with a remarkable 60% to 80% energy savings compared to clutch motors. With the high and rising cost of electricity, you just can’t afford to run a clutch motor any longer.

The power and dependability of the brushless Enduro™ Elite SM1000-2 is exceptional. This workhorse just won’t quit.The Enduro™ Elite SM1050-2 Servo Motor is designed to meet almost all basic heavy duty and continuous use requirements of various industrial sewing machines. It utilizes extremely powerful rare-earth Neodymium permanent magnets. The motor produces almost no noise, saves energy (60-80%) and is brushless, speed adjustable and durable. It provides a high starting torque even at low speed or from a complete stop.

By using a modern technologically advanced micro-processor, Hall sensor and Pulse-Width Modulation technology, the Enduro™ Elite SM1050-2 can be set to rotate at different maximum speeds, in either normal or reverse directions, and can start with different accelerating speeds. It will stop automatically with any interruption such as in-line voltage, electrical surge, radio frequency interference or overloading. It is fully protected by the software and will give error messages indicating which problem is encountered. It even works well in environments with an unstable electrical power supply.

The Enduro™ Elite SM1050-2 Servo Motor is covered with a 1 year limited warranty. If the motor fails to perform its designed function due to manufacturer’s defects, contact the place you purchased it from for repair or replacement. This warranty does not cover defects due to dropping, power surge, spikes or misuse.

Non-Positioner Servo Motor

• 220V
• Single Phase
• Cycles: 50/60
• Variable Speed to 5000 RPM
• 0-1400 WATT

Features and Settings:

Motor rotating direction setting
Slow starting speed
Maximum speed setting

Supplied With:

Instruction manual / parts list
Mounting hardware
Pulley cover (belt guard)
100mm pulley
Push button on/off wire harness

Additional Information:

Motor Weight: 11.6 lbs.
Motor Dimensions:
11.25″ L x 7.5″ W x 8.5″ H
Shipping Weight: 14.85 lbs
Shipping Dimensions:
14″ L x 11.5″ W x 10.5″ H