stanley_sewing_continous_run_motor.jpeg

Motors

Showing 1–12 of 16 results

  • Continuous run

    Continuous run (2)

  • Servo

    Servo (8)

  • Full function Electronic

    Full function Electronic (2)

  • Clutch

    Clutch (6)

  •  DC1500
     Brushless direct current  motor in compact design  for flange mounting with  integrated incremental  encoderPnom = 400W;
    Mmax = 3 Nm;
    Nmax = 9000 rev./min

     DC1550
     Brushless direct current  motor in compact design  for flange mounting with  integrated incremental  encoderPnom = 600W;
    Mmax = 8 Nm;
    Nmax = 5000 rev./min

  • 110V 1/2HP Clutch Motor

    $ 135.00

     

    E-Z CLUTCH MOTORS (pictured at left) feature: 1/2 h.p.; built-in, pre-wired 6 volt plug-in receptacle; fully enclosed pulley guard which meets OSHA requirements; vibrationless table mounts and built-in adjustable belt tightener; swivel mounted clutch head; extra heavy flywheel; and standard Amco-style 3/4″ bore pulleys. A push button switch box is included free with all sigle phase (110 v.) motors.

    You Choose!     1725 RPM 0r 3450RPM

    Comes complete with plug, wire and switch

    1/2 HORSE

    110volt    (great for in home use)!!!

    Please make sure of the RPM and voltage when placing your order!!!!


  • 110V clutch motor 3/4hp

    $ 139.00

    E-Z CLUTCH MOTORS  feature: 3/4 h.p.; built-in, pre-wired 6 volt plug-in receptacle; fully enclosed pulley guard which meets OSHA requirements; vibrationless table mounts and built-in adjustable belt tightener; swivel mounted clutch head; extra heavy flywheel; and standard Amco-style 3/4″ bore pulleys. A push button switch box is included free with all sigle phase (110 v.) motors.

    Comes complete with plug, wire and switch

    Also has 3 mounting bolts!


  • 110V ON / OFF SWITCH

    $ 28.95

    110VAC 1 phase on off switch   Complete with wiring harness


  • 220V Clutch Motor

    $ 140.00

    CLUTCH MOTORS  feature: 3/4 h.p.; built-in, pre-wired 6 volt plug-in receptacle; fully enclosed pulley guard which meets OSHA requirements; vibration-less table mounts and built-in adjustable belt tightener; swivel mounted clutch head; extra heavy flywheel; and standard Amco-style 3/4″ bore pulleys.

    Also has 3 mounting bolts!

    220VAC

    Note    Switch NOT included


  • 220V Three Phase Circuit Breaker Switch

    $ 28.60

    3 Phase Curcuit Breaker switch  w\mount.

    Adjustable 4.4 – 6.6 Amp

    wired with 4ft \ 8ft cord.  includes   plug


  • 220VAC Continuous Run Motor

    $ 172.00

    220VAC Continuous Run Motor for Button sewer, Buttonhole and Bar-tacker Machines. Precision balance for smooth quiet performance. Fan ventilated for cooler running. Built-in belt tightener adjustable for correct belt tension. Enclosed OSHA type belt guard for safety; fully adjustable. Oversize ball bearings pr-lubricated and permanently sealed.
    RPM 1725
    3/4 shaft size for standard pulley

    220VAC 3 Phase


  • Con Serv CS1000 / CS2000 Servo

    $ 145.00$ 188.00

    The CSM1001  is a 3/4 HP (550 Watt) Brushless Servo Motor that includes the Needle Positioner (synchronizer)
    Energy Efficient – Saves up to 70% Electricity.  Speed: 0–4,200 RPM.
    The CSM1000  is the same model without the synchronizer.

     

    The CSM3001 is a 1 HP (750 Watt) Brushless Servo Motor that includes the Needle Positioner (synchronizer)
    Energy Efficient – Saves up to 70% Electricity.  Speed: 0–4,200 RPM.
    The CSM3000 is the same model without the synchronizer.

     


  • CS1001 CIRCUT BOARD

    $ 70.00

    CS1001 REPLACEMENT BOARD  110V POSITION MOTOR

     

    PLUG AND PLAY


  • CSM550-1 Premier Servo 110V

    $ 129.00

    • Energy efficient circuitry saves electricity costs
    • Quiet operation, silent when in stopped position
    • Uses the same mounting holes as a clutch motor
    • High Torque D.C. Electronic Servo Induction Motor
    • Switch, Cord and Plug included
    • Easy to adjust speed with the Control Knob
    • Reversible with Switch
    • No clutch or brake disc required
    • Lightweight: 15.5 lbs. (17 lbs. shipping weight)
    • Belt guard, pulley and mounting hardware included
    • 110V light adapter
    • Vibration absorbing rubber motor mounts
    • Also available in 220V – Model CSM550-1/220V

    Specifications

    Voltage (motor) 110 v
    Amps / Watts (motor) 550: 550 W / 400: 400 W
    Motor Speed (motor) 0 – 3450 RPM
    Phase (motor) 1 – phase
    Horsepower (motor) 550: 3/4HP / 400: 1/2 HP
    Motor Type Servo

     


  • Enduro Pro SM650-1 / SM650-2 Servo

    $ 165.00
    Features and Settings:

    Motor rotating direction setting
    Slow starting speed
    Maximum speed setting

    Supplied With:

    Instruction manual / parts list
    Mounting hardware
    Pulley cover (belt guard)
    90mm pulley
    Toggle on/off wire harness

    Non-Positioner Servo Motor
    • Model 650-1        110Volt
    • Model 650-2        220Volt    1 phase
    • Single Phase
    • Cycles: 50/60
    • Variable Speed to 5000 RPM
    • 800 WATT

  • Sale!

    Enduro SM1050-2P Servo 220V

    $ 295.00 $ 276.25

    Server Motor with Position-er

    Features and Settings:

    Motor rotating direction setting Slow starting speed Maximum speed setting
    Needle Position Setting

    Supplied With:

    Instruction manual / parts list
    Mounting hardware
    Pulley cover (belt guard)
    100mm pulley
    Push button on/off wire harness
    Position-er sensor kit  —  fits 7/8 Hub

    220V
    Single Phase
    Cycles: 50/60
    Variable Speed to 5000 RPM
    0-1400 Watt