Sale!

Enduro SM1052 2PF SERVO 220V

$ 329.00 $ 315.00

Servo Motor with Position-er and Foot Lift

Features and Settings:

Motor rotating direction setting
Slow starting speed
Maximum speed setting
Needle Position Setting

Supplied With:

Instruction manual / parts list
Mounting hardware
Pulley cover (belt guard)
100mm pulley
Push button on/off wire harness
Position-er sensor kit  —  fits 7/8 Hub
24 Volt  Foot Lift Output

  • 220V
  • Single Phase
  • Cycles: 50/60
  • Variable Speed to 5000 RPM
  • 0-1400 Watt

Out of stock

Compare

Description

This motor pays for itself with the energy it saves! The super quiet Enduro™ Elite SM1000-2PF Servo Motor pays for itself with a remarkable 60% to 80% energy savings compared to clutch motors. With the high and rising cost of electricity, you just can’t afford to run a clutch motor any longer.

The power and dependability of the brushless Enduro™ Elite SM1000-2PF is exceptional. This workhorse just won’t quit.The Enduro™ Elite SM1050-2PF Servo Motor is designed to meet almost all basic heavy duty and continuous use requirements of various industrial sewing machines. It utilizes extremely powerful rare-earth Neodymium permanent magnets. The motor produces almost no noise, saves energy (60-80%) and is brushless, speed adjustable and durable. It provides a high starting torque even at low speed or from a complete stop.

By using a modern technologically advanced micro-processor, Hall sensor and Pulse-Width Modulation technology, the Enduro™ Elite SM1000-2PF can be set to rotate at different maximum speeds, in either normal or reverse directions, and can start with different accelerating speeds. It will stop automatically with any interruption such as in-line voltage, electrical surge, radio frequency interference or overloading. It is fully protected by the software and will give error messages indicating which problem is encountered. It even works well in environments with an unstable electrical power supply.

The positioner motor comes with a positioner sensor kit included. With correct installation and settings, Enduro™ Elite SM1000-2PF can provide accurate Needle Positioning of either the UP or DOWN position every time. In addition to Needle Positioning, Enduro™ Elite SM1000-2PF provides Foot Lift output which sends a 24VDC signal for activating a solenoid for lifting the presser foot on the sewing machine.

The Enduro™ Elite SM1000-2PF Servo Motor is covered with a 1 year 
limited warranty. If the motor fails to perform its designed function
due to manufacturer’s defects, contact the place you purchased it 
from for repair or replacement.This warranty does not cover defects 
due to dropping, power surge, spikes or misuse.
Additional Information:

Motor Weight: 11.6 lbs.
Motor Dimensions:
11.25″ L x 7.5″ W x 8.5″ H
Shipping Weight: 14.85 lbs
Shipping Dimensions:
14″ L x 11.5″ W x 10.5″ H

Additional information

Weight 16. lbs
Dimensions 14 x 12 x 11 in